Rechargeable power supplies are convenient in that after a full charge is consumed, they can be connected to a charger and fully restored.
The GP 1000 has a cylinder shape, so it can easily fit in small portable devices. Such an element has not only the ability to quickly recover, but also other qualities, which will be discussed later.
Content
Specifications GP 1000
The technical characteristics of the element must be known in advance in order not to accidentally install the wrong current source in the device. The GP1000 battery has the following options:
| Parameter | Value |
|---|---|
| Basic designation | AAA |
| The form | Cylinder |
| View | Ni-mh |
| Capacity | 930-950 mA / h |
| Voltage | 1.2 v |
| Analogs HR03 | Read more HERE |
| Height | 44.5 mm |
| Diameter | 10.5 mm |
| Weight | ~ 13 gr |
| Operating temperature range | from -20˚С to + 50˚С |
| Number of recharge cycles | up to 1000 |
The battery requires up to 16 hours of charging from the AC adapter, which should also be considered when operating the power source.
Analogs and what can be replaced
When a battery of this type fails, it can be replaced by both similar batteries and conventional AAA batteries. If the original product was used in a high power device, then alkaline little pink cells can be used.
Such products have increased power, so the electronic device will work almost as long as when using a battery. You should not use only lithium products of a similar shape, because the contacts of such batteries generate a voltage of 3.6 volts.
The full equivalents of the GP 1000 rechargeable battery are:
- Varta 1000.
- Duracell 850.
- Ansmann 1000.
- Panasonic 1000.
- Batteries AAA LR03.
- AAA HR03 batteries.
All of these models can completely replace the battery GP 1000.
Battery Applications
The battery has a good supply of electricity, so it can be successfully used in the following electronic devices:
- Remote controls.
- Children's toys.
- Radios.
- Measuring instruments.
- Flashlights.
You can purchase AAA battery slots in stores. Such products can be used in the independent manufacture of various electronic devices using a GP 1000 rechargeable battery.
How to charge GP 1000
You can infect the GP 1000 battery in special chargers for cylindrical batteries. In order not to worry about the safety of the battery, as well as to exclude the possibility of fire, it is recommended to purchase a charger with a built-in automatic control system.
The presence of such a “fuse” will allow not only safe charging, but also determine the moment of complete restoration of the element. As a rule, in this situation, the green indicator lights up.
After acquiring a new battery, it should be fully charged and discharged by the recommended load. This operation is repeated several times in order to “swing” the battery capacity to the declared values.
It is not recommended to use self-made devices for charging batteries of this type, or you should constantly monitor the temperature of the battery case and its voltage. A fully charged GP 1000 battery should provide approximately 1.3 volts at the terminals.
What to look for when purchasing
The original GP 1000 battery is difficult to confuse with similar elements. The manufacturer indicates the type of element on the case.The packaging also indicates the voltage and capacity of the battery, so the buyer can easily find the GP 1000 element on the store counter.
In some cases, the purchase should be abandoned even if the price of the product is very attractive. Particular attention should be paid to the battery life. Such products can be stored for several years without loss of performance, but only in ideal conditions.
If you violate the rules of pre-sale placement, you can purchase inoperative items, so it is undesirable to purchase stale goods. Markings with a release date can also be found on the battery case.
Still have questions about GP 1000 battery or have something to add? Then write to us about it in the comments, this will make the material more complete and accurate.
