The device for providing high-quality service to the Pendant 405 battery is especially popular among motorists. Such a demand is explained by optimal technical characteristics and impeccable operation of the device.
Content
Model Overview
The charger is a black box equipped with a digital display panel. It displays the following indicators:
- operating mode;
- voltage power;
- Emergency Signal;
- device status.
Also on the screen there are two blue keys (installation / mode), allowing you to independently adjust the settings. The device is able to function in two modes: charger and power supply. The charge indicator displays the charging steps.
Please note that the smart device has built-in protection against short circuits and overheating. In case of improper operation of the device fuses fail.
Technical characteristics of the block “Pendant 405”
| Characteristics | Values |
|---|---|
| Voltage | 220 V |
| Battery Voltage Rating | 6 V, 12 V |
| Maximum charge current | 5 A |
| Maximum voltage | 16 V |
| Input voltage frequency | 60 Hz |
| The period of setting the highest current in the memory mode | 0.1–5 A |
| Interval of setting the highest current in BP mode | 0.1–5 A |
| The period of setting the highest voltage in the memory mode | 6-16 v |
| Battery charge current in the absence of electricity | up to 10 mA |
| Short circuit current | 0.5 A |
| Dimensions | 160x84x60 mm |
| Weight | 500 gr |
| Manufacturer | LLC "BALSAT" |
Features of the model and for which battery is suitable
The Pendant 405 device is designed to charge 6 and 12 volt batteries of the AGM, WET and GEL type. Decently copes with the task. Able to restore even a deeply discharged battery.
Experts recommend using the device for batteries, the capacity of which ranges from 1-120 Ah. It is worth noting that the device can be used as an uninterruptible power supply for signaling.
“Pendant 405” is a kind of microcontroller that optimizes the process of charging the battery. After charging the battery, the device is able to maintain its charge for a long time.
The smart device is equipped with additional features:
- The device independently calculates the number of transferred ampere-hours during the battery charge. It is possible to display this value on the screen using the up button.
- A voltmeter allows you to measure battery voltage. To do this, you do not need to connect the "Pendant 405" to the network. It is enough to connect the terminals to the battery. The indicators will be displayed for 10 seconds on the device screen. Please note that when the battery voltage is less than 5V, the indication does not appear.
The product of BALSAT is designed for use in temperate climates. The preferred ambient temperature is from -25 ° C to + 42 ° C, while the humidity should not exceed 98% (at + 25% C °).
How to charge the battery using the "Pendant 405"
The operation of this model is not difficult. To start using the charger, follow the simple instructions:
- connect the device to AC power;
- set the mode by pressing a key with the same name;
- select the charge parameters corresponding to the type of battery;
- connect the contact clamps (the red wire connects to the battery, the black to the battery terminal).
When the product operates correctly in the “Power Supply” mode, the LED light is green.Red lights up when the load increases, resulting in a loss of output voltage.
After the end of work, it is necessary to disconnect the device from the battery, and then interrupt the interaction with the AC mains.
Download the official PDF manual
Charger Instruction Manual Pendant 405 can download HERE, and the certificate HERE.
You have a charger Pendant 405? Then tell us in the comments which one and about your impressions about him, this will greatly help other motorists and will make the material more complete and accurate.
Reviews
Over 80% of reviews on the charger are positive, which is especially valuable for a domestic brand device:
Maxim L.
The best charger I've ever had. Before that, he used Bosch, which broke very quickly. Since it could not be repaired, I purchased a new “Pendant 405”, deciding not to splurge heavily. I was pleasantly surprised. The model exceeded all expectations.
Denis R.
The model is fully consistent with the declared characteristics. Not once rescued in the winter. I recommend.
Kirill Sh.
Initially, thin wires were embarrassed, but this did not affect the quality of work. I was pleased with such a useful purchase. The optimal combination of decent quality and low price.
