The CR2412 battery is a push-button lithium cell with a relatively large diameter and high working capacity. More details about the main technical characteristics and applications of the battery will be described in more detail below.
Content
Technical Specifications CR2412 Battery
The CR2412 battery has the following main parameters:
| Parameter | Value |
|---|---|
| Basic designation | CR2412 |
| View | Lithium |
| The form | Tablet (Coin) |
| Capacity | 100 mAh |
| Voltage | 3 v |
| Replaces CR2412 | Read more HERE |
| Diameter | 24 mm |
| Height | 1.2 mm |
| Working temperature | from -40 to + 60˚C |
| Weight | 2,5 gr |
| Shelf life | more than 10 years |
The CR2412 battery belongs to the class of lithium-manganese cells, therefore, it has enhanced capacity characteristics and has a wide range of operating temperatures.
Battery Applications
Batteries of this type can be used in the following devices:
- Remote controls.
- Trinkets car alarm.
- Calculators.
- Hours.
- Medical devices.
- Children's toys.
- Cameras.
The scope of the CR2412 element can be significantly expanded by the independent manufacture of small devices that require a 3-volt power source to operate.
Analogs of element CR2412
When there is a need to replace a dead battery, and there is no battery of this type in retail outlets, you can use analogues that are fully consistent with the voltage and shape of CR2412.
These items include:
- BR2412.
- LM2412.
- PNSPK1.
Also, the original battery can be replaced with an analog only with a digital designation (2412). Unfortunately, unlike most batteries, this one has very few analogues.
Can I charge the CR2412 battery
Cell CR2412 is not a battery. Attempts to charge it with a battery charger will not bring the desired result. Such an operation not only does not restore the power of the battery, but can also cause a fire from excessive heating or explosive depressurization of the housing.
Using alternative recovery methods will also not allow you to restore the health of the item. For example, heating the battery in hot water can only increase the voltage for a short time, but after installing the CR2012 in an electronic device, it will completely discharge in literally a few minutes.
Despite the fact that the cost of a CR2012 battery is quite high, it is better not to risk it and purchase a product from well-known manufacturers of such products.
Popular manufacturers and their features
To reduce the likelihood of acquiring low-quality products, it is recommended to give preference to products manufactured under well-known brands. This category of firms includes:
- IEC
- Maxell.
- Panasonic
Products of these brands have a long service life, while throughout the entire period of operation, the voltage is kept at a fairly high level. Storage of such products can also be carried out for a long time, due to the low level of self-discharge of the battery.
What to look for when purchasing
Before you purchase a new CR2412 battery, you must carefully inspect the product body and packaging. The type of element, voltage and brand must be indicated on the metal surface of the product. The same marking, as well as information about the country of the manufacturer, is applied to the packaging of the battery.
In addition to compliance with the main parameter, the battery should not have visible damage. Even minor scuffs or scratches will indicate a violation of the rules of storage and transportation, therefore, if such flaws are found, it is better to refuse the purchase.
